[1]孙磊磊,屈献永,郑磊.X65MO小直径厚壁HFW海底输送管研制[J].焊管,2024,47(1):32-38.[doi:10.19291/j.cnki.1001-3938.2024.01.006]
 SUN Leilei,QU Xianyong,ZHENG Lei.Development of X65MO Small Diameter Thick Wall HFW Offshore Linepipe[J].,2024,47(1):32-38.[doi:10.19291/j.cnki.1001-3938.2024.01.006]
点击复制

X65MO小直径厚壁HFW海底输送管研制()
分享到:

《焊管》[ISSN:1001-3938/CN:61-1160/TE]

卷:
47
期数:
2024年第1期
页码:
32-38
栏目:
应用与开发
出版日期:
2024-02-01

文章信息/Info

Title:
Development of X65MO Small Diameter Thick Wall HFW Offshore Linepipe
文章编号:
10.19291/j.cnki.1001-3938.2024.01.006
作者:
孙磊磊屈献永郑磊
宝山钢铁股份有限公司中央研究院,上海 201900
Author(s):
SUN Leilei QU Xianyong ZHENG Lei
Research and Development Institute, Baoshan Iron & Steel Co., Ltd., Shanghai 201900, China
关键词:
HFW海底输送管拉伸性能屈强比卷取温度冷却速度
Keywords:
HFW offshore linepipe tensile properties yield ratio coiling temperature cooling rate
分类号:
TG113.25
DOI:
10.19291/j.cnki.1001-3938.2024.01.006
文献标志码:
B
摘要:
针对大厚径比HFW海洋管制管过程中纵向屈强比上升的问题,研究了化学成分、冷却工艺对X65MO管线钢组织和性能的影响。结果表明,增加C元素含量或去除V元素有利于降低材料预拉伸后的纵向屈强比;试验材料在高温下卷取,其显微组织为铁素体+珠光体,轧态纵向拉伸曲线具有较长的屈服平台,预拉伸后具有最低的屈强比和最高的均匀延伸率;随着卷取温度降低,晶粒更加细小,贝氏体组织增加,预拉伸后的纵向屈强比上升幅度较大,而在相同卷取温度下,降低冷却速度有利于降低预拉伸后的纵向屈强比。根据研究结果制定了卷板工艺,试制了X65MO钢级 Φ323.9 mm×14.3 mm HFW海管,管材横纵向屈强比等拉伸性能均满足规范要求。
Abstract:
The effect of chemical composition and cooling process on the microstructure and properties of X65MO pipeline steel was studied to solve the issue of increased longitudinal yield ratio during the process of high thickness to diameter ratio HFW offshore linepipe. The results showed that increasing the content of C element or removing V element were beneficial for reducing the longitudinal yield ratio of the material after pre?ension. At high temperatures, the microstructure of test material is ferrite+pearlite, and the longitudinal tensile curve in the rolled state has a long yield plateau. After pre?ension, it has the lowest yield strength ratio and the highest uniform elongation. As the coiling temperature decreases, the grains become finer, and the bainite structure increases. The longitudinal yield strength ratio after pre?ension increases significantly. At the same coiling temperature, reducing the cooling rate is beneficial for reducing the longitudinal yield strength ratio after pre?ension. A rolling process was developed and for the developed X65MO steel Φ323.9 mm×14.3 mm HFW offshore linepipe, tensile properties, such as transverse and longitudinal flexural ratios, can meet the specification requirements.

参考文献/References:

[1] 郑磊,高珊,陆敏.海底管线用钢的开发和应用[J].焊管,2006,29(5):36-39.[2] 王海涛,池强,李鹤林,等.海底油气输送管道材料开发和应用现状[J].焊管,2014,37(8):25-29.[3] 牛爱军,毕宗岳,张高兰,等.海底管线用管线钢及钢管的研发与应用[J].焊管,2019,42(6):1-6.[4] 胡松林.焊管在海底管道中的应用探讨[J].焊管,2019,42(11):1-5.[5] 杨连河,叶培荣,李虎昌,等.X70钢级HFW海底管线钢管的研制和开发[J].钢管,2010,39(1):48-52.[6] 张业圣,李志卫.海洋石油用管的发展现状和前景展[J].钢管,2009,38(5):1-l0.[7] 王怡然,孙磊磊.退火温度对小直径厚壁HFW焊管组织与性能的影响[J]. 焊管,2021,44(5):9-13.[8] 胡松林.海洋用厚壁HFW管线管的研发[J].钢管,2012,41(3):28-32.[9] 高惠临.管线钢屈强比分析与评述[J].焊管,2010,33(6):10-14.[10] 胡松林,屈献永,张曙华.HFW高频焊接管线管屈强比的控制与探讨[J].钢管,2020,49(5):23-25.

相似文献/References:

[1]孙 宏.高钢级螺旋缝焊接钢管拉伸试样类型选择[J].焊管,2007,30(5):36.[doi:1001-3938(2007)05-0036-03]
 SUN Hong.Study of Choosing the Tensile Test Specimen’s Type for High Grade SSAW Steel Pipe[J].,2007,30(1):36.[doi:1001-3938(2007)05-0036-03]
[2]陈小伟?,李延丰,张远生,等.试样形式对X80钢板及钢管拉伸试验结果的影响[J].焊管,2009,32(1):21.[doi:1001-3938(2009)01-0021-05]
 CHEN Xiao-wei,LI Yan-feng,ZHANG Yuan-sheng,et al.The Effect of Specimen Shape on Tensile Test Results of X80 Grade Steel Plate and Steel Pipes[J].,2009,32(1):21.[doi:1001-3938(2009)01-0021-05]
[3]孙 宏.拉伸试验速率对X80级管线钢拉伸试验结果的影响[J].焊管,2009,32(1):53.[doi:1001-3938(2009)01-0053-03]
 SUN Hong.The Effect of Tensile Test Rate on Test Result of X80 Grade Pipeline Steel[J].,2009,32(1):53.[doi:1001-3938(2009)01-0053-03]
[4]孙宏,王晓香.X80级螺旋埋弧焊接钢管应变时效研究[J].焊管,2009,32(10):16.[doi:1001-3938(2009)10-0016-03]
 SUN Hong,WANG Xiao-xiang.Research on Strain Aging for X80 Grade HSAW Steel Pipe[J].,2009,32(1):16.[doi:1001-3938(2009)10-0016-03]
[5]孙宏,宗秋丽,汪海燕,等.螺旋埋弧焊管管体横向纵向拉伸试验结果分析[J].焊管,2010,33(1):18.[doi:1001-3938(2010)01-0018-03]
 SUN Hong,ZONG Qiu-li,WANG Hai-yan,et al.Transverse and Longitudinal Tensile Test Results Analysis for SSAW Pipe[J].,2010,33(1):18.[doi:1001-3938(2010)01-0018-03]
[6]吴金辉,赵建新2,李富强,等.板厚与取样位置对螺旋焊管母材拉伸性能的影响[J].焊管,2010,33(6):20.[doi:1001-3938(2010)05-0020-03]
 WU Jin-hui,ZHAO Jian-xin,LI Fu-qiang,et al.Effect of Plate Thickness and Sampling Location on Tensile Properties for the Pipe Body of Spiral Welding Steel Pipe[J].,2010,33(1):20.[doi:1001-3938(2010)05-0020-03]
[7]孙宏.螺旋埋弧焊管制管前后拉伸性能变化的统计分析[J].焊管,2011,34(2):13.[doi:1001-3938(2011)02-0013-04]
 SUN Hong.Analysis on Tensile Property of SAWH Pipe Before and After Forming[J].,2011,34(1):13.[doi:1001-3938(2011)02-0013-04]
[8]赵金兰,杨东升,王增辉.试样形式对X65/X70大壁厚海底用直缝埋弧焊管拉伸试验结果的影响[J].焊管,2011,34(7):31.
[9]韩秀林,李国鹏,张丽娜,等.X80直缝埋弧焊管制管前后拉伸性能的变化[J].焊管,2012,35(3):19.[doi:1001-3938(2012)03-0019-05]
 HAN Xiu-lin,LI Guo-peng,ZHANG li-na,et al.Study on the Tensile Property Before and After Forming of X80 SAWL Pipe[J].,2012,35(1):19.[doi:1001-3938(2012)03-0019-05]
[10]魏伟荣,杨专钊,刘元永,等.高钢级厚壁海管拉伸性能试验研究[J].焊管,2013,36(10):64.[doi:1001-3938(2013)10-0064-04]
 WEI Weirong,YANG Zhuanzhao,LIU Yuanyong,et al.Research on Tensile Property Test of the High Grade Submarine Pipe with Heavy Wall Thickness[J].,2013,36(1):64.[doi:1001-3938(2013)10-0064-04]

备注/Memo

备注/Memo:
收稿日期:2023-05-20作者简介:孙磊磊(1988—),男,硕士,高级工程师,主要方向为钢铁材料开发。
更新日期/Last Update: 2024-02-01